Blog

Get a Quote

Home -

MID Mould Industrial Ltd. Blog

Injection Molding with Glass-Filled Engineering Plastics: PA66-GF30, PPS and PEEK Mold Design Considerations

Engineering plastics such as PA66-GF30, glass-filled PPS and PEEK are increasingly used for demanding automotive, electrical, industrial and high-performance applications. Compared with standard plastics such as ABS or PP, these materials provide excellent mechanical, thermal and dimensional ...

August 25, 2026
Prototype Injection Mold vs Production Mold: How to Choose the Right Tooling for Your Project

When developing a new plastic product, one of the first tooling decisions is whether to build a prototype injection mold or move directly to a production mold. The right choice depends not only on mold price, but also on production quantity, product maturity, material requirements, expected mold ...

August 25, 2026
How to Reduce Warpage in Injection Molded Plastic Parts: From Part Design to Mold Optimization?

Warpage is one of the most common dimensional problems in plastic injection molding. A part may look acceptable immediately after molding but deform after cooling, resulting in poor flatness, assembly problems, dimensional deviations, or functional failure. For injection molded parts with large flat ...

August 25, 2026
Overmolding Tech Advances Product Design and Manufacturing

In modern industrial design and manufacturing, "integration" and "user experience" have become fundamental concepts. When designers envision electronic products that combine metal-like structural integrity with silk-like tactile surfaces, traditional manufacturing approaches often reach an impasse: ...

July 22, 2026
Overmolding Advances Precision in Modern Manufacturing

Introduction: The Technological Mystery at Your Fingertips When you grip a power drill with its anti-slip rubberized handle or touch the soft, skin-friendly seal on medical equipment, have you ever wondered how these two fundamentally different materials—rigid engineering plastics and flexible ...

July 22, 2026
Plastic Products Wall Thickness: The Most Recommended Reference

Plastic Products Wall Thickness: The Most Recommended Reference Introduction Injection-molded parts can be complex to manufacture. For best results, designers must understand the molding process, design for manufacturing (DFM) best practices, and the importance of material selection. One of the key ...

July 21, 2026